HQRP Solar Charge Controllers are high quality, efficient and reliable Solar Power Regulators. Suitable for all 12/24v DC Lamps. They are perfect for rural electrification system. They offer a lot of possibilities and benefits. Can be used to control lighting devices. Regulations point: 14.4 Volts; Low voltage Disconnect: 11.1V Volts; Low voltage Reconnect: 12.6 Volts; Microcontroller digital accuracy; Type of Charging: Series PWM & stat of charge(SOC); 4 Stages: equalization, PWM, Boost and Float, temperature compensated charging; Electronic protections: Short circuit and over current-solar and load; Reverse polarity-solar, load, battery; Reverse current at night; Limits high voltage to protect loads; Lighting protection; Tropicalization: Conformal coated printed circuit board; Self-consumption: 6mA maximum. Solar Controller supports up to 300W of 12V Solar panels and up to 600W of 24V Solar panels. For 12V solar panels, please, use battery and load for 12V solar systems (For 24V solar panels, please, use battery and load for 24V solar systems).
The large diameter, big interval terminals, can install 6 mm2 conducting wire , wire interval is 9.5 mm, can enhance the isolation and the installation reliability.
HQRP UV Meter: This meter shows you the level of UV and helps you protect your eyes and skin from negative sunlight effect. The color of the meter changes from very light purple to dark purple depending on the intensity of the UV lighting. The darker the purple color is, the more intense is the UV lighing.
If you need to monitoring the solar system or setting the controller, you may have to buy a MT-50 remote meter separately. Description The Tracer-BN series controller is for off-grid solar system and control the charging and discharging of the battery. The controller features a smart tracking algorithm that maximizes the energy from the solar PV module(s) and charge the battery. At the same time, the low voltage disconnect function (LVD) will prevent the battery from over discharging. The battery charging process has been optimized for long battery life and improved system performance. The comprehensive self-diagnostics and electronic protection functions can prevent damage from installation mistakes or system faults. In addition, the Tracer-BN series controller has a RJ45 interface to allow communication with other accessory. Technical Data Nominal system voltage: 12VDC / 24VDC Auto work Rated charge current:40A Rated discharge current: 20A Max. solar input voltage:150VDC Max. PV input power:520W(12V battery) 1040W(24V battery) Self-consumption*:â‰¤50mA(12V) â‰¤27mA(24V) Dimension:302.5mm x 182.7mm x 63.5mm Mounting hole size:Î¦4.7 Power cable:25mm2 Weight: 2.9kg
Morningstar, TriStar Remote Digital Meter (for TS-MPPT) with 100' cable, TS-RM-2
Brand: Morning Star
The meter will display a great deal of information about the TriStar controller and the operation of your system. In addition, the meter enables manual functions and controller diagnostics. These capabilities will increase your confidence that the system is working properly and will help you to improve system reliability, battery life, and system performance. It is worth the time getting to know your meter! Morningstar's TriStar Meter-2 (TS-M-2) and TriStar Remote Meter-2 (TS-RM-2) are advanced digital meters that may be used with any TriStarTM solar controller. These two meters are identical except that the TS-M-2 is mounted on the controller and the TS-RM-2 is flush mounted up to 30 meters (98.4 feet) away from the controller. The TriStar meters are 2 x 16 character LCD's that display extensive system and controller information, logged data, bar graph metering as well as alarms and faults for easy troubleshooting. The information may be shown in English, French, German, Portuguese or Spanish languages. In multi-controller systems the TS-M-2 and TS-RM-2 are networkable using Morningstar's MeterHub to allow individual controller data and aggregate system data to be displayed together on a single meter.
AGPtekÂ® 30A Solar Panel Power Battery Charge Controller / Regulator 12V / 24V 30 Amp with PWM Type of Charging (Automatic Lighting Control + Time Functions)
Specification: 1.Voltage: 12V/24V Auto Switch 2.Charge current: 30A 3.Load current: 30A 4.Empty load consumption:Â¡Ãœ6MA 5.Charge Circuit Voltage Drop:Â¡Ãœ0.26v 6.Discharge Circuit Voltage Drop:Â¡Ãœ0.15 7.Over voltage Protection:17V ,X2/24V 8.Increase Charge Voltage:14.6v,x2/24v(10min when discharging) 9.Direct Charge Voltage:14.4v,x2/24v(10min) 10.Float Charging:13.6v,x2/24v(till come down to charging recovery voltage) 11.Temperature compensation (mV/C): -5mv/Â¡Ã¦/2v 12.Operating temperature: -35 ~ +55C 13.Control mode: PWM 14.Maximum support 720Watt (24V) 15.360Watt (12V) 16.Dimension: 140mm*95mm*34mm How To Use? 1. Digital LED display shows the 16 lighting options (by switch with 5 seconds) 2. Number display, from 0 to 7, DC output. 3. Number display, from 0. to 7. 1Hz output. 4. Digital LED stop flash to confirm correct switch selection. 5. 10 minutes delay to make sure its real dark. Package: 1 x 30A solar charge controller 1x Users' Manual Trademark AGPtek products are marketed exclusively by Brainydeal, any misuse of AGPtek without prior approval from AGPtek will take legal action.
Why we recommend buy MPPT Solar Controller?
MPPT circuit solar controllers are considerably more elaborate than PWM. The voltage of the solar panel changes with time of day and temperature. The optimum voltage for battery charging changes as the state of charge of the battery. The MPPT charge controller matches these voltages and can result in 30% more efficient transfer of power. This means good MPPT solar charge controllers can reduce the number of solar panels needed by up to 30%- a tremendous benefit. Even if the excess panels are purchased, benefits are realized in a Grid Tie system because more electricity can be sold back to the grid. While only a small part of system price, a MPPT solar panel charge controller can leverage the rest of the system to better performance.
* Model No: RR210RN
* Nominal System Voltage: 12VDC | 24VDC Auto work
* Rated Battery Current: 10A
* Maximum Battery Voltage: 32V
* Max. Solar Input Voltage: 100VDC
* Max. PV input power: 12V/ 130W 24V /260W
SMAKNÂ® 10A Solar Panel Charge Controller Regulator 12/24V for dual battery
*Rated charge current: 10A
*Rated discharge current: 10A
*Short-circuit current protection: 35A
*System voltage: 12 / 24V
*Operating temperature: -35 â„ƒ - +55 â„ƒ
*Enhance the overshoot voltage: 14.6V X2/24V
*Straight voltage: 14.6V X2/24V
*Were rushed voltage: 14.2V X2/24V
*Float voltage: 13.8V X2/24V
*Charge recovery voltage: 13.2V X2/24V
*Discharge cut-off voltage: 10.8V X2/24V
*Discharge recovery voltage: 12.6V X2/24V
*Control mode: PWM pulse control technology
*Size: 140mm * 70mm * 32mm
*A key setting, convenient and beautiful;
*Double digit LED display, clear and intuitive;
*Set aside four fixed space, easy to install;
*Simple graphical interface panel, indicate obvious;
*MOS floor close to the back of the heat pipe, heat faster and more secure;
*6 mm large aperture terminals, lower loss, charging more efficient.
We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help. Our aim is to provide Top Level Customer Service, so we will try our best to solve any problem.
Thank you very much!
The high performance cells are encapsulated in EVA (ethylene-vinyl-acetate) & placed between high transparent low iron tempered glass & a durable TPT (tedlar-polyester-tedlar) back sheet. The panels are framed using heavy-duty anodized aluminum frames, providing exceptional panel rigidity. Manufactured in China, Cells Importedï¼ˆnon-Chinese Cellsï¼‰ PWM 10A 12V/24V Auto Switch Charge Controller offers great battery protection and High charge efficiency. Vistit us at www.Newpowa.com for more details.
SMAKN Bare PCB board 12V 5A solar controller/Small household system controller
*Rated charge current: 5A *Rated discharge current: 5A *Short-circuit current protection: 35A *Operating temperature: -35 â„ƒ - + 55 â„ƒ *Control mode: PWM pulse modulation techniques *Size: 61mm * 33mm * 1.6mm Products: *The solar charge controller uses a single chip intelligent control, double MOS series charging circuit, the more general anti-intrusion diode circuit, can increase charging efficiency. *Built-in intelligent four-stage PWM charging process of lead-acid, can significantly extend battery life. *The charger has overshoot, over-discharge protection, short circuit protection, overcurrent protection, anti-sink down at night and so on. Feedback: We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help. Our aim is to provide Top Level Customer Service, so we will try our best to solve any problem. Thank you very much!
Note: You had better connect to the battery first when you operate the system Features: This item is a new-generation solar charge and discharge controller for lead-acid battery. The product includes but is not limited to the following functions and properties: Excellent heat balance design and natural air cooling 4-stage charge period management (EQU, Bulk, ABS. Float) Temperature compensation function, the controller can automatically adjust the charge parameters of battery by environment temperature to prolong the service life of battery Comprehensive and reliable load control mode can identify the day and night Well-designed charge loop can effectively improve the efficiency of charge and discharge, and reduce the heat consumption in charge and discharge Specification: Color: Black Size: 14.5 x 8.0 x 3.0 cm Package Weight: 9.7 oz/276g System voltage of PV: 40V Maximum voltage of PV: 30A Maximum discharge current: 20A Maximum output voltage: 12V/24V Maximum output power: 360W/720W Compatible battery: lead-acid cell Charge way: 3-state- PWM Charge USB Charge port: 5V 1A Temperature compensation: YES This item is equipped with a LCD display and can be conveniently switched between modes and parameter configuration. Operation is convenient and simple Package Includes: - 1 X Solar Controller - 1 X User Manual