Morningstar SunSaver MPPT 15L, MPPT Charge Controller, 15 Amp, 12/24Volt , LVD Override Protection The Morningstar SunSaver MPPT charge controller is designed for 12V and 24V battery charging from PV modules with a maximum open circuit voltage of 75V. Use up to three 36-cell modules in series. It can be used with 200 watts of PV when charging a 12-volt battery and up to 400 watts when charging a 24-volt battery. Provides an estimated 5-25% boost of amps from the PV array into the battery. Actual boost depends on PV cell temperature and battery state of charge. Enables the use of high voltage PV modules (designed for on-grid applications) for off-grid 12V or 24V battery charging. Provides a means to use a 24V PV array to charge a 12V battery, reducing power losses in systems with a long cable run between the PV array and the battery. The controller has electronic protection from short circuit, overcurrent, reverse polarity, high temp, high voltage, lightning and transient surges. An adjustable low battery voltage load disconnect protects the battery from over-discharge. LED indicators indicate charging, low battery and faults. Dimensions is 1.65 lbs. 5-year warranty.
HQRP Solar Charge Controllers are high quality, efficient and reliable Solar Power Regulators. Suitable for all 12/24v DC Lamps. They are perfect for rural electrification system. They offer a lot of possibilities and benefits. Can be used to control lighting devices. Regulations point: 14.4 Volts; Low voltage Disconnect: 11.1V Volts; Low voltage Reconnect: 12.6 Volts; Microcontroller digital accuracy; Type of Charging: Series PWM & stat of charge(SOC); 4 Stages: equalization, PWM, Boost and Float, temperature compensated charging; Electronic protections: Short circuit and over current-solar and load; Reverse polarity-solar, load, battery; Reverse current at night; Limits high voltage to protect loads; Lighting protection; Tropicalization: Conformal coated printed circuit board; Self-consumption: 6mA maximum. Solar Controller supports up to 150W of 12V Solar panels and up to 300W of 24V Solar panels. For 12V solar panels, please, use battery and load for 12V solar systems (For 24V solar panels, please, use battery and load for 24V solar systems). HQRP UV Meter: This meter shows you the level of UV and helps you protect your eyes and skin from negative sunlight effect. The color of the meter changes from very light purple to dark purple depending on the intensity of the UV lighting. The darker the purple color is, the more intense is the UV lighing.
MISOL PWM Solar regulator 10A / Charge Power Controller / Regulator 12V / 24V 10 Amp solar charge controller
Description: Manual ON/OFF It is an economic controller for off grid solar system, especially for rural solar home system Automatically control the charge and discharge Easy to operate Current:10A Voltage:12/24V Features: Microcontroller digital accuracy PWM Charge mode State of charge (SOC) Temperature compensation Automatic detection of the voltage Electronic protection Short circuit protection Reverse polarity protection Reverse current protection at night Over charging or discharging protection Over load protection Display 3 LED indicators PV: Green: charging Battery: Green-Yellow-Red Load: Red -low voltage warning and disconnect LED blinking shows mistakes Battery voltage parameters (TEMPCO -30mV/cel.degree/12V, 25 cel. degree) Equalize charging voltage:14.8V;x2/24V Boost charging voltage:14.4V;x2/24V Float charging voltage:13.7V;x2/24V Low voltage reconnect charging voltage:13.2V;x2/24V Under voltage warning voltage: 12V; x2/24V Low voltage disconnect voltage :11.1V;x2/24V Equalize duration:60 MINS Boost duration 60 MINS Environmental parameters Working temperature: -35 to +55Cel. degree Humidity:10%-90% Enclosure IP30 Terminal 2.5mm2 Net weight 0.15KG
Manufacturer: Go Power!
Brand: Go Power!
The GP-PWM-10 is a pulse width modulated (PWM) digital solar controller with built in USB. This solar controller that can handle up to 10 amps of solar (roughly 180 watts of solar). The backlit display makes it easy to see the incoming current from the solar panels, the battery voltage and the battery state of charge. This solar controller can handle up to #6 AWG wire. The GP-PWM-10 has a 5 year warranty.
Ten-high 800w Wind Solar Hybrid Controller (600w Wind + 300w Solar) 12v/24v Auto Distinguish
Model: 800W Wind Solar Hybrid Controller
1. Independent Boost Circuit: Solved the charging efficiency of the low-power vertical wind generator. 2. MPPT charging way, make sure power max. input to battery and high charging efficiency obtained. 3. Be able to use for 200W-600W wind turbine with high compatibility. 4. 12V/24V System Automatic Recognition function. 5. Allow to connection reversely by battery or solar panel positive negative polarity. 6. Mini-size, be easy to install.
DC 12V Digital Temperature Controller Thermostat F
This Temperature Controller is an excellent and convenient multifunction device for controlling temperature in Aquariums. The stability of aquarium temperature is one of the crucial factors that contributes to the health and safety of your fish. By utilizing the temperature controller, you can provide an environment with optimal temperature for your fish. This advanced temperature controller can measure and control temperature from -58 to 194 Â°F. This device is also suitable for Laboratories,Gardening,livestock and other temperature-controlled systems. The majority of machine components using SMT placement machines, sophisticated technology. Temperature Measuring Range: -58 ~ 194 deg F Control temperature range: -58 ~ 194 deg F Temperature measuring difference: Â±1 deg F Resolution: 1 deg F Accuracy: Â± 1 deg F (-50 ~ 70 deg F) Sensor Type: NTC (10K/3435) Working voltage: 12V DC Power consumption: < 3W Relay contact Current: Rated 5A Data retention: Yes Working temperature: 32 ~ 122 deg F Storage temperature: -14 ~ 140 deg F About size: 86 x 71 x 29 mm ( L*W*H ) Install Window Size: 70.5 x 28.5 mm
It is ideal where a 12-volt low-power controller is needed. It can control up to 75 watts of PV module(s). Since it is epoxy encapsulated, it can be used outdoors in a harsh environment. Dimensions are 2.5" x 2" x 1.6" with wire leads for connecting module and battery. 5-year warranty.
MidNite Solar Surge Protection Device MNSPD-300-AC
Manufacturer: Midnite Solar
Brand: MidNite Solar
Model: MidNite Solar MNSPD-300
Surge protector for AC systems from MidNite Solar. Features: Surge Protector MNSPD-300 Designed for AC systems 300V Surge Protector Device Type 1 device per UL1449 rev3 Protection for off grid PV combiners and 120/240 VAC circuits Protection for Classic and other charge controllers Size 4.4 L x 3.8 W x 3.5 D (inches)