Description MPPT circuit solar controllers are considerably more elaborate than PWM. The voltage of the solar panel changes with time of day and temperature. The optimum voltage for battery charging changes as the state of charge of the battery. The MPPT charge controller matches these voltages and can result in 30% more efficient transfer of power. This means good MPPT solar charge controllers can reduce the number of solar panels needed by up to 30% - a tremendous benefit. While only a small part of system price, a MPPT solar panel charge controller can leverage the rest of the system to better performance. Specifications Negative grounded Nominal System Voltage: 12V/24V Auto recognition Max. PV Input Power: 400W (12V), 800W (24V) Rated Charge Current: 40A Rated Discharge Current: 20A Max. Solar Input Voltage: 100VDC Self-consumption: <10mA (24V) Maximum Battery Voltage: 32V Charge Circuit Voltage Drop: â‰¤0.26V Discharge Circuit Voltage Drop: ?0.15V Communication: TTL232 / 8 pin RJ45 Warranty Information 1-year material warranty.
Advanced maximum power point tracking technology to optimize the use of the PV system.
Peak conversion efficiency of 97%, high Tracking efficiency of 99%.
Electronic protection: PV array short circuit, Over discharging, Overcharging, Load overload, and Load short circuit.
Reverse protection: PV reverse polarity and battery reverse polarity.
Corrects the charging and discharging parameters automatically, improving battery life.
Product Information Specifications for Renogy Tracer 4210 40 Amp MPPT Charge Controller, 12/24V 100VDC Input Below:
Sunforce 50013 1-Watt Motorcycle and Powersports Solar Battery Charger
Color: Solar Cell
The Sunforce 50013 1-Watt Power Sports Charger is the perfect solution for charging the batteries of motorcycles, personal water crafts, ATVs, snowmobiles and more. Constructed with amorphous solar cells, this solar panel is maintenance-free and extremely easy to install. With its built-in overcharge / discharge protection, this top of the line solar panel works in all daylight conditions to keep your batteries charged. The complete kit includes: 8 ft. of wire connected to the solar panel, 8 ft. of extra wire, battery clamps, O ring connector, fuse, and Quick Connect Technology for simple installation. The Sunforce 50013 1-Watt Power Sports Charger is the perfect solution for charging the batteries of motorcycles, personal water crafts, ATVs, snowmobiles and more. Constructed with amorphous solar cells, this solar panel is maintenance-free and extremely easy to install. With its built-in overcharge/discharge protection, this top-of-the-line solar panel works in all daylight conditions to keep your batteries charged. The complete kit includes 8 ft. of wire connected to the solar panel, 8 ft. of extra wire, battery clamps, O ring connector, fuse, and Quick Connect Technology for simple installation. Convenient charging for power sport vehicles Convenient Power That Helps Keep Your Batteries Charged This Sunforce solar charger lets you harness the power of the sun, the most powerful and plentiful source of energy available to us. Unlike nuclear and fossil fuels, solar power is clean and pollution-free, and the equipment requires very little maintenance to operate. Sunforce Solar Panels are effective in areas of both high and lower sun exposure, making them ideal for use in the United States The Power Sports Charger may be attached directly to your battery using either of the accessories included with the charger. Included with the charger are a set of â€œOâ€ Rings as well as a set of battery clamps. Both are equipped with quick connect technology to allow...
Hompie Intelligent LCD 30A 12V/24V 360W/720W PWM Solar Charge Controller Regulator Adapter Charger For Street Lamp Base Station Solar Power Panel Energy System Environment Monitor Battery Wifi Hotspot
Intelligent solar controller, which is equipped with industrial-grade STM 8 microprocessor to control the charge and discharge process. And, it has perfect and liable battery charge and discharge period management. The charge circuit is characterized by high efficiency and low consumption by controlling the MOSFET of the ultra-low internal resistance with PWM. This controller has multiple load control modes and is adaptable to different industries. Solar Controller Specifications - Battery Voltage: 12V/24V auto - Max Discharge Current: 30A - Working Temperature: -35Â°C to +60Â°C - Self consume: â‰¤10mA - Float Charge: 13V(default, adjustable) - Discharge stop:10.7V(default, adjustable) - Discharge reconnect:12.6V(default, adjustable) - Size:133*70*32mm -USB Charge port: 5V 2A - PWM battery charging - All necessary protections equipped - Adjustable controlling parameter of the system - Compatible Battery: Lead-acid Cell Feature -Build-in industrial micro controller -Big LCD display, all adjustable parameter -Fully 4-stage PWM charge management -Build-in short-circuit protection, open-circuit protection, reverse protection, over-load protection -Dual mosfet Reverse current protection ,low heat production -Suitable for Home, Industrial, Commercial etc Package Includes -1 x Solar Charge Controller -1 x User Manual HOW TO USE it could recognize the solar output and adjust the voltage to match the battery specifications. For example, after receiving 24 volts from solar panel, if it has recognized the storage battery is 12 volt, the controller will send 24 volts into a 12 volt battery. NOTE: Please be sure to connect the battery first before your solar panel or the unit will not power up
P30L LCD 30A PWM Solar Panel Regulator Charge Controller with Digital Display and User Adjustable Settings
Manufacturer: Windy Nation
Model: CHC-LCD-30 and CHC-LCD-20
WindyNation's P30L solar charge controller is a premium grade PWM solar controller. The digital display provides all necessary solar system information and also serves as a user interface for adjusting the charge controller's settings. It is the perfect solar charge controller for an RV, boat, small cabin or any other off-grid installation, where user configurability and system information is important.
Solar charge controllers are high quality, efficient and reliable solar power regulators.
Suitable for all 12/24v DC lamps. They are perfect for rural electrification
They offer a lot of possibilities and benefits.
Can be used to control lighting devices.
Regulations point: 14.4 Volts;
Low voltage disconnect: 11.1V Volts;
Low voltage reconnect: 12.6 Volts;
Microcontroller digital accuracy;
Type of Charging: Series PWM & stat of charge(SOC);
4 Stages: equalization, PWM, Boost and Float, temperature compensated charging;
Electronic protections: Short circuit and over current-solar and load;
Reverse polarity-solar, load, battery;
Reverse current at night;
Limits high voltage to protect loads; Lighting protection;
Conformal coated printed circuit board;
Features: Intelligent control is realized by using microprocessor and dedicated control calculationÂ¡Â£ Five load working modes: pure lighting control, lighting control & timing control, hand operation and debug mode. Using large-diameter wire terminal, can fix the wire which max size is 6mm Parameter is set to power-down save function, the system model and control parameters, and other important data are stored inside the chip, after power is not lost, to make the adjustment more convenient, more reliable system. Using 2 digital LEDs display and settings, one-button operation to complete all of the settings, intuitive and easy to use. Specifications: Rated charge current: 30A Rated load current: 30A Work voltage: 12V/24V AUTO No load losses current: 5mA-20mA (only when digital LEDs being lighted) Charging circuit voltage drop: â‰¤0.26V Load circuit voltage drop: â‰¤0.15V Over voltage protection: 14.8V; x2/24V Boost charge voltage: 14.6V; x2/24V Direct charge voltage: 14.4V; x2/24V Float charge voltage: 13.6V; x2/24V Charge recover voltage: 13.2V; x2/24V Over discharge recover voltage: 12.6V; x2/24V Lower voltage indication: 12.0V; x2/24V Over discharge voltage: 11.1V; x2/24V (no load) real-time modified voltage by the discharge rate Temperature compensation: -4.0 MV/â„ƒ 2V (boost voltage direct charge, float charge and charge return voltage compensation) Control method: PWM pulse-duration modulation charge mode Working temperature: industry stage: -35â„ƒ~+55â„ƒ Color: black Note: Let the little children away from the storage battery and the controller Package Includes: 1*Digital PWM 30A Solar Charge Controller 1*User Manual
The Renogy Wanderer is a 30A PWM charge controller. This advanced negative-ground controller is designed for off-grid solar applications and can be used with a 12V battery or battery bank. Integrating highly efficient PWM charging, the Wanderer increases battery life and improves system performance. The controller comes equipped with fully comprehensive self-diagnostics and electronic protection functions to prevent damage from installation mistakes or system faults. Negative grounding controller ensures the broader off grid applications and safety, especially to be used on a vehicle which has battery negative on the chassis. A little extra investment on the right charge controller will generate a much higher return and prevent system failure.
MPPT TRACER 3215RN Solar Charge Controller 30A 12V 24V EP
Why we recommend buy MPPT Solar Controller? MPPT circuit solar controllers are considerably more elaborate than PWM. The voltage of the solar panel changes with time of day and temperature. The optimum voltage for battery charging changes as the state of charge of the battery. The MPPT charge controller matches these voltages and can result in 30% more efficient transfer of power. This means good MPPT solar charge controllers can reduce the number of solar panels needed by up to 30%- a tremendous benefit. Even if the excess panels are purchased, benefits are realized in a Grid Tie system because more electricity can be sold back to the grid. While only a small part of system price, a MPPT solar panel charge controller can leverage the rest of the system to better performance. Specification: * Model No: Tracer-3215RN * Nominal System Voltage: 12VDC | 24VDC Auto work * Rated Battery Current: 30A * Maximum Battery Voltage: 32V * Max. Solar Input Voltage: 150VDC * Max. PV input power: 12V/ 390W 24V /780W * Self-consumption:
Instapark INCC1205 12V / 5A Waterproof PWM Solar Charge Controller
Color: One Color
The Instapark INCC1205 solar charge controller is designed and engineered to prevent your 12V battery from overcharging when it's connected to a solar panel, therefore protect your investment and extend the battery life. The INCC1205 solar charge controllers is equipped with PWM technology to ensure that your battery reaches its maximum charging capacity without causing any damage to the battery. Similar to other modern high quality battery chargers, PWM algorithm gradually reduces the charging current to avoid over-heating of the battery, yet the charging continues to return the maximum amount of energy to the battery in the shortest time resulting in higher charging efficiency, faster recharging and a healthier battery at its full capacity. Each INCC1205 charge controller comes with four green LED indicators and one red LED indicator displaying battery status, connection status and real-time battery charge capacity. The INCC1205 solar charge controller is in full conformance with both CE and RoHS standards and is backed up by a standard 2-year manufacturer's warranty. Specifications: Rated solar input current: 5A Rated output charging current: 5A Charging voltage: 12.8V Cut-off voltage: 14.6V Float voltage: 13.8V Temp Comp. (mV/Â°C): -30mV/-60mV Temperature: -31Â°F to 131Â°F Package Includes: Instapark INCC1205 12 volt / 5 amp Solar Charge Controller Battery Terminal Clamps 5.5mm x 2.1mm female to bare wires (solar panel output) adapter User manual