The Morningstar Prostar 15M has automatic equalization, temperature compensation and very high efficiency. This controller can be used on 12- or 24-volt systems with sealed, gel and wet-cell lead-acid batteries. Front panel LEDs indicate when the batteries are being charged and relative battery state of charge. Reverse polarity protection on input and output. In the event of a load short circuit, the load is automatically disconnected. Ã¢â‚¬Å“MÃ¢â‚¬? models include LCD meter of battery voltage, PV charging current, and load current. Low voltage LVD is current-compensated to prevent false disconnect when the battery is heavily loaded. Units are conformal coated to guard against corrosion. Optional battery remote temperature sensor (RTS) available. Dimensions: 6.01" x 4.14" x 2.2". 5-year manufacturer warranty.
An excellent charge controller with multi-function display.
Product Information Specifications for MORNINGSTAR PROSTAR PS-15M CHARGE CONTROLLER - METER, 15 AMP, 12/24 VOLT DC Below:
Wide DC voltage range: DC11-28v AC output voltage: AC 90-130v MPPT Voltage: 18.7-24v, if the input voltage is not within this range, the efficiency will be less than the standard efficiency. Normal AC Output Power:920W Max AC Output Power: 1000W Frequency: 46-65Hz, adjust by inverter automatic High frequency and high efficiency Total Harmonic Distortion(THD): 5% Power Factor: 0.99 LED light show different working status Output waveform: pure sine wave Standby Power consumption:0.5W Peak Inverter Efficiency: 90% Easy to install, DC connect your solar panel(red terminals connect "+", black terminals connect "-"), AC connect your home grid Packing content: 1PC Power inverter1PC Power cord 1PC user manual Note1: this grid tie inverter was designed for 12v solar panel, if you want to work with wind generator, please confirm the DC input voltage is within our inverter's DC range Note2: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility
Outdoor Lighting, Outdoor Solar Lights, Outdoor Post Lighting, Solar Lamp Post, 80-inch High Three Head Solar Lamp Post and Planter
The fresh and airy look of bright white makes this Vittoria Three-Head Solar Lamp Post stand out, placing an emphasis on colorful landscaping in front and back yards. A trio of glass shades are carefully arranged to offer a classic aesthetic and a fantastic complement to patio or garden designs. Thanks to sensors that detect natural light, its bulbs automatically engage at dusk and turn off again when the sun begins to rise. Embellish this exquisite look by choosing the optional model with a planter at its base, inviting radiant color and rich greenery to the mix.
Advantages: 1000W 24V input 110V Output Inverter with 5V 500mA High Quality with Cheap price CE ROHS FCC Soft start Description: The I-P-PPI3 300W-1000W series inverter is the third generation of our high frequency pure sine wave inverter, which converts DC to AC. The output waveform is pure sine wave. It has many advantages, such as strong stability, high conversion efficiency, prefect protection function and so on. Application: 1. Service Vehicles including Recreation Vehicle 2. Boat 3. Camping 4. Telecommunication 5. Fieldwork / Construction site 6. Solar power&wind power system 7. Emergency backup power 8. Home electronics: TV, DVD, video game consoles 9. Office appliance: Computer, printer, monitor, fax machine Packing List: 1 Piece 1000W 24V input 110V output Inverter 1 Piece User Manual (English)
More Models are available SUN-250G: B004TVEF8Y, Wind-250G: B008BDAQDY Sun-300G: B005N2WHDI, Wind-300G (10.8V ~ 30VAC) : B007WQBK2C, Wind-300G (10.8V ~ 30VDC): B005N2OLZU Sun-500G: B008CNM1SQ, Sun-S500G-HI: B005N29SGM Wind-500G (10.8V ~ 30VAC): B007WQDKMA, Wind-500G-HI (22V ~ 60VAC): B007X0L2C0 Wind-500G (10.8V ~ 30VDC): B005N2ST9E Sun-600G: B007XAEINU, Sun-600G -HI (10.8V ~ 30VDC): B005N2VLO4 Sun-1000G-HI (10.8V ~ 30VDC): B007XAP0V4 Preface This model grid-tie has build in bridge rectifier and dump load controller, it can maintain the rotating speed of the wind turbine and keep the voltage from the wind turbine always at the range of the rated range of the grid tie inverter. It also has a high voltage protection function, when the wind is too big, and the dump load controlling system can't keep the output voltage from the wind turbine, the controller will disconnect itself from the wind turbine, so it is very safe to be used. There are 4 terminals on the left side of the inverter, one red terminals and one black will be connected to the phase output from the wind turbine, and 2 black terminals will be connected to dump load resistors. Electrical Specifications Normal AC Output Power: 450W Maximum AC Output Power:550W AC Output Voltage Range: 90V ~ 130V AC Output Frequency Range: 46Hz ~ 65Hz
NIMTEK ML800 Pure Sine Wave Off-grid Inverter, Solar Inverter 800 Watt 48 Volt DC To 220 Volt AC
Brand: NIMTEK Solar Inverter
Specification: *Model: ML800 *Power: 800W *Peak Power: 1600W(within 5 millisecond) *DC Input Voltage: 48V *AC Output Voltage: 220V *Standby Current: 0.48A *Frequency: 50HZÂ±1% *Waveform Distortion: THDï¼œ3% *Size: 270*139*73mm *Work Temperature: -10Â°C - +50Â°C *Storage Temperature: -30Â°C - +70Â°C *Work Altitude: â‰¤1200m *Humidity: 20%-90%RH without condensation Features: *Converts 48V DC to 220V AC of pure sine wave power. *Ideal for running small electronic tools, air pumps, electronic doors, small motors, refrigerators, HDTVs, electronic game systems, computers, laptops and inkjet laser printers. *High transform efficiency, fast start. *Pure sine wave output waveform. *Softstart function. *Strong adaptability and stability. *With automatic over-current and output short circuit protection to avoid damaging the equipment. *Temperature-controlled fan, safe & efficient. *Safe and reliable with built-in fuse. *Protections: Battery low alarm/Battery low shutdown/Over voltage/Over temp/Output short/Input polarity reverse/Overload. Remarks: This inverter could be customized, if you have special needs, please leave us below information when placing order. Customizable input voltage: 36V, 72V or 96V Customizable output voltage: 110V, 115V, 120V, 200V, 230V or 240V Customizable Frequency: 50HZ or 60HZ
Output Power:600W/110V; AC Output Voltage: 90V-140V Frequency Range: 48Hz ~ 62Hz Auto DC Input: 22V-60V MPPT range: 25.5V - 45V. It will perfect compatible with panels at 30V or 36V (Vmp) It cannot be used with 12v battery as input source.
Solar inverter with in-built charge controller Solar inverter takes power from solar panel (12V AGM Battery), stores in battery and produces standard electricity (110/120V 60hz) for household use. It's built-in charge controller is a microprocessor-based system designed to implement the PWM. It can increase charge current up to 30% or more compared to traditional charge controllers. Features - Modified sine wave AC output, wide application range. - Inbuilt with 30A PWM solar charge controller - Battery reverse protection. - battery cables included - compact size fit for home use, small solar system.
ATKINSON MINI GENERATOR START CONTROL MODULE (GSCM-MINI-I)
This Generator Start Controller is connected to your inverter to receive a signal when the battery bank is low and needs to be charged by the generator and battery charger/inverter charger. The GSCM-Mini-I is optimized for use with OutBack inverters but can be used with other inverters. Includes cables for most Honda and Onan generators. It supports three types of 3-wire gas-generator control: momentary, maintained or ignition. It has a fixed crank time and over and under frequency shutdown. Generic connection diagrams are included. You may call Atkinson Technical Support directly for assistance if needed (they are very helpful). You may also contact us via Amazon message with your particular generator model and we can determine for you which GSCM unit will work for your application.